o RENTALS o USED EQUIPMENT
|
|
|
o RENTALS o USED EQUIPMENT |
Sight-Pipes for Tube ID Inspection Optics
|
SIGHT-PIPES® are ideal for visually inspecting orbital tube welds typical in the semiconductor and nuclear industry. When inserted into a tube/fitting welded assembly, SIGHT-PIPES® project a magnified image of the weld to the top of the enlarged head of the SIGHT-PIPE®. The image seen would be similar to that produced by sectioning the tube and looking directly at the weld. DWS ships worldwide. Visa and MasterCard accepted on phone orders; call DWS at 408-773-0231. |
 |
Stop collars provide a way to control the depth to which a SIGHT-PIPE® can be inserted into the tube being inspected. The stop collar is assembled, positioned, and clamped at the desired position on the shank of the SIGHT-PIPE®. The section view below shows the no marring clamping technique used. This series of SIGHT-PIPES® is available to fit tubes from 1/4" X .035" wall to 1" X .065" wall, with three lengths available for each tube size. These SIGHT-PIPES® have a reduced diameter at the end to clear any reduction in I.D. caused by the weld bead. |
|
|
